Anti-gravel film: vinyl or polyurethane?


Anti-gravel film – the invention is quite new and therefore not very well known. Meanwhile, attention to this method of protecting the car deserves the most close. Small debris from under the wheels in front of the car, grass and branches on narrow country roads, careless approach to the curb or leprosy of the courtyard boys can greatly spoil the appearance of any car. Science has not yet come up with 100% protection against such troubles, but careful driving, coupled with anti-gravel film, will reduce the risk of getting mechanical damage to a minimum, and this is a good result.


Anti-gravel film is used to protect against damage and preserve the attractive appearance of the body of the car and its individual parts (headlights, bumpers, etc.). The film protects the paint and varnish from cracks and chips, skips the ultraviolet and is completely invisible to the eye. Of course, if it comes to quality film, pasted by professionals. Ordering an anti-gravel film on the site , there it is worth ordering and applying it, because doing this without having the experience will be very difficult. The body of the car needs to be prepared beforehand, thoroughly washing, polishing and polishing it, and the film itself is cut according to patterns, which are selected in accordance with the model of the car. Before application, the film is heated by a hair dryer or hot steam to ensure a tight fit to the surface and to avoid the appearance of air bubbles that damage the appearance of the car.


The most popular are anti-gravel films made of vinyl and polyurethane. Vinyl film is more flexible, it protects the paintwork surface from burnout and costs less than polyurethane. On vinyl it is easy to apply a drawing that allows to use such film for tuning of the car. However, it can not boast of particular strength and does not withstand very well the negative temperatures, which is particularly critical in the northern regions. Polyurethane anti-gravel film is denser and more reliable, but these drawbacks can also be called its disadvantages – to apply a film on the curved surface it has to be cut, otherwise the bends will be covered with an ugly pattern resembling cellulite. In addition, polyurethane with a little yellowing, which also affects the appearance of the car is not the best way.


Ultimately, the choice of anti-gravel film remains with the buyer. Give preference to vinyl, at the same time transforming the appearance of the car, or polyurethane, presented in the store AutoProTech ? Only the car owner can decide, according to personal taste, needs and financial capabilities. But the answer to the question “Is it worth it to glue an anti-gravel film?” Is quite unambiguous – replacing it with a new one after 3-5 years of operation will be much cheaper than regularly getting rid of chips and scratches on the car paintwork.